Software for Automatric Potentiometric Titrators [AT-Win]


AT-Win software enables your PC to control KEM's Automatic Potentiometric Titrators
e.g., AT-710B, AT-700, AT-510 or AT-500N.

When it is connected to AT-710B, the functions equivalent to AT-710M will be available.

  • Windows® 7 or Windows® 10 Easy operation with PC
  • Possible to output data such as result, method in PDF format
  • ONE AT-Win software can control multiple Automatic Potentiometric Titrators simultaneously. *1
  • Navigation function automatically configures settings of measurement conditions by inputting category, sample parameter, measurement range, etc.
  • Possible to set a user ID and password to prevent a situation that some parameters were changed without noticing it.
  • SOP Macro can display arbitrary messages and/or numeric inputs (up to 20 steps) on the screen.
  • Fully GLP conformed.
  • Operation lock function mounted.
  • Automatic folder creation function mounted.
  • Any computer connected through LAN to the main computer directly connected to the titrator can perform re-analysis or re-calculation.

    *1 When using multiple titrators, one needs as many key code cards as units.

    Operating system Windows® 7 Professional (SP1 or later)32 or 64bit
    or Windows® 10 Pro 64bit
    Memory More than 1GB RAM
    Hard disk space 40GB or more free space
    Required software

    Microsoft® Internet Explorer® 8.0 or later
    Adobe® Reader® more than 9.0 or later

    Display Resolution of 1024×768 or higher
    Disk drive CD-ROM or DVD-ROM drive
    Serial port RS-232C D-sub male 9pin or USB port :1 port *1
    Expansion slot (in expansion) One empty PCI or LPCI slot or more

1) One needs as many serial ports as Automatic Potentiometric Titrators.Also another serial port is needed if connecting a balance or a barcode reader.
2) Please note that one serial port may be already used if the PC includes a modem.